HOME | Contact Us

Current Issue

Journal of Asian Architecture and Building Engineering - Vol. 15 , No. 3

[ Environmental Engineering ]
Journal of Asian Architecture and Building Engineering - Vol. 15, No. 3, pp.627-634
ISSN: 1346-7581 (Print) 1347-2852 (Online)
Print publication date 30 Sep 2016
Received 04 Apr 2015 Accepted 11 Jul 2016
DOI: https://doi.org/10.3130/jaabe.15.627

Dynamic Spatial-temporal Evaluations of Urban Heat Islands and Thermal Comfort of a Complex Urban District Using an Urban Canopy Model
Lin Liu1 ; Yaoyu Lin2 ; Dan Wang3 ; Jing Liu*, 4
1Doctoral Candidate, School of Municipal and Environmental Engineering, Harbin Institute of Technology, China
2Associate Professor, Shenzhen Key Laboratory of Urban Planning and Decision Making Simulation, Shenzhen Graduate School, Harbin Institute of Technology, China
3Research Assistant, Shenzhen Key Laboratory of Urban Planning and Decision Making Simulation, Shenzhen Graduate School, Harbin Institute of Technology, China
4Professor, School of Municipal and Environmental Engineering & State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, China

Correspondence to : *Jing Liu, Professor, Harbin Institute of Technology, No.73 Huanghe Road, Nangang District, Harbin, China Tel: +86-451-8628-3363 Fax:+86-451-8628-2123 E-mail: liujinghit0@163.com

Funding Information ▼

Abstract

This study conducted hourly dynamic simulations of the thermal climate and thermal comfort of 120 blocks within the complex district of the International Low Carbon City (ILCC) by applying an urban energy balance model (UDC), during the summertime in Shenzhen. Two parameters, including the local urban heat island (LUHI) and SET*, were adopted as evaluation indices, and the temporal-spatial distributions of these parameters were discussed. The results show that the northeast blocks of the ILCC always presented higher values of LUHI and SET* compared with the lower values of the middle blocks. The LUHI values varied between different blocks at the same time, ranging between -4°C and 4°C, whereas the SET* values varied from 27.5°C to 33.5°C. The large differences in the LUHI and SET* values between these blocks may be caused by their different urban spatial patterns and the varied underlying surface compositions. Additionally, the average diurnal variation of LUHI showed more fluctuations compared with the continuous conic variation manner of SET*. The average maximum values of LUHI and SET* both occurred in the afternoon, whereas the average minimum values occurred in the early morning.


Keywords: urban energy balance model, spatial-temporal simulation, local urban heat island, thermal comfort

References
1. Dudhia, J. (2014) A history of mesoscale model development. Asia-Pacific Journal of Atmospheric, 50(1), pp.121-131.
2. Gagge, A. P., Fobelets, A. P. and Berglund, L. G. (1986) A standard predictive index of human response to the thermal environment. ASHRAE Transactions, 92, pp.709-731.
3. Grimmond, C. S. B., Blackett, M., Best, M. J., Barlow, J., Baik, J. -J., Belcher, S. E., Bohnenstengel, S. I., Calmet, I., Chen, F. and Dandou, A. (2010) The International Urban Energy Balance Models Comparison Project: First Results from Phase 1. Journal of Applied Meteorology and Climatology, 49(6), pp.1268-1292.
4. Grimmond, C. S. B. and Oke, T. R. (2002) Turbulent heat fluxes in urban areas: Observations scheme and local-scale urban meteorological parameterization scheme (LUMPS). Journal of Applied Meteorology and Climatology, 41, pp.792-810.
5. Hagishima, A., Tanimoto, J., Katayama, T. and Ohara K. (2001) An organic analysis for quantitative estimation of heat island by the revised architecture-urban-soil-simultaneous simulation model, AUSSSM. Journal of Architecture and Planning (Transactions of AIJ), 550, pp.79-86 (In Japanese with English abstract).
6. Jimenez, P. A. and Dudhia, J. (2012) Improving the representation of resolved and unresolved topographic effects on surface wind in the WRF model. Journal of Applied Meteorology and Climatology, 51, pp.300-316.
7. Kanda, M., Kawai, T., Kanega M., Moriwaki, R., Narita, K. and Hagishima, A. (2005) A simple energy balance model for regular building arrays. Boundary-Layer Meteorology, 116, pp.423-443.
8. Kondo, A., Ueno, M. and Kaga, A. (2001) The influence of urban canopy configuration on net radiation flux. Boundary-Layer Meteorology, 100, pp.225-242.
9. Lemonsu, A., Grimmond, C. S. B. and Masson, V. (2004) Modelling the surface energy balance of an old Mediterranean city core. Journal of Applied Meteorology and Climatology, 43, pp.312-327.
10. Liu, Y., Chen, F., Warner, T., and Basara, J. (2006) Verification of a mesoscale data-assimilation and forecasting system for the Oklahoma City area during the Joint Urban 2003 field project. Journal of Applied Meteorology and Climatology, 45(7), pp.912-929.
11. Liu, J., Jiang, A. X., Wang, K. Zhu, Y. M. and Hagishma, A. (2006) Evaluation model for coupled urban local climate and building. Journal of Harbin Institute of Technology, 38(1), 38-40 (In Chinese with English abstract).
12. Masson, V. (2000) A Physically-based scheme for the urban energy budget in atmospheric models. Boundary Layer Meteorology, 94(3), pp.357-397.
13. Mu, K., Liu, J., Li F., Zhang, J., Lu, Z. and Liu, J. (2013) The dynamic prediction on outdoor thermal climate in a complicate urban complex. 13th Conference of the International Building Performance Simulation Association. France: 998-1005.
14. Murakami, S., Mochida, A. and Hayashi, Y. (1990) Examining the k-ε model by means of a wind tunnel test and large-eddy simulation of the turbulence structure around a cube. Journal of Wind Engineering & Industrial Aerodynamics, 35, pp.87-100.
15. Oke, T. R. (1982) The energetic basis of the urban heat island. Quarterly Journal of the Royal Meteorological Society, 108, pp.1-24.
16. Oke, T. R. (1987) Boundary layer climates. 2nd ed. New York: Methuen.
17. Oke, T. R. (1988) The urban energy balance. Progress in Physical Geography, 12, pp.471-508.
18. Oleson, K. W., Bonan, G. B., Feddema, J., Vertenstein, M. and Grimmond, C. S. B. (2008) An urban parameterization of a global climate model. Part I: Formulation and evaluation for two cities. Journal of Applied Meteorology and Climatology, 47(4), pp.1038-1060.
19. Rao, J., Liu, J., Xiao, R. B. and Liang, H. Y. (2014) Field measurement and simulation of the micro-thermal climate in a typical dwelling district in China: the Guangzhou case. IWEERB2014, Zhengzhou, China.
20. Snelder, M. and Calvert, S. (2016) Quantifying the impact of adverse weather conditions on road network performance. European Journal of Transport and Infrastructure Research, 16(1), pp.128-149.
21. Spagnolo, J. and de Dear, R. (2003) A field study of thermal comfort in outdoor and semi-outdoor environments in subtropical Sydney Australia. Building and Environment, 38(5), pp.721-738.
22. Sofer, M. and Potchter, O. (2006) The urban heat island of a city in an arid zone: the case of Eilat, Israel. Theoretical and Applied Climatology, 85, pp.81-88.
23. Takemi, T., and Rotunno, R. (2003) The effects of subgrid model mixing and numerical filtering in simulations of mesoscale cloud systems. Monthly Weather Review, 9(131), pp.2085-2101.
24. Zhu, Y. M., Liu, J., Hagishima, A., Tanimoto, J., Yao, J. and Ma, Z. L. (2007) Evaluation of coupled outdoor and indoor thermal comfort environment and anthropogenic heat. Building and Environment, 42, pp.1018-1025.
25. Zhu, Y. M., Liu, J., Li, B. X., Ye, Z. D., Rao, H. and Wang, J. Y. (2011) Thermal climate evaluation in process of urban planning. Journal of Harbin Institute of Technology, 43(6), pp.61-64 (In Chinese with English abstract).
26. Zhu, Y. M., Liu, J., Yao, Y., Ma, Z. L., Hagishima, A. and Tanimoto, J. (2006) Evaluating the impact of solar radiation on outdoor thermal comfort by the development and validation of a simple urban climatic model. International Solar Energy Conference, Denver, USA, pp.8-13.